Aluminum Offset Plates

Print

Aluminum 4-hole Spacer Plates may be installed in either anterior/posterior or medial/lateral orientation. Available in a 12 mm offset, a five degree reverse angle offset and a five degree forward angle offset. These components are useful in dynamic alignment situations when additional angular adjustment is required. These plates may be left in the definitive prosthesis if desired. Screws included.

Product Highlights:
  • Can be used in the definitive prosthesis
  • May be oriented in either AP or ML position

Aluminum 4-Hole 12 mm Offset Plate Specifications

Weight 54 g
Patient Weight Limit* 250 lb (115 kg)
Warranty 12 months from date of patient fitting

 

Aluminum Reverse Angle Offset Plate Specifications

Weight 54 g
Patient Weight Limit* 250 lb (115 kg)
Warranty 12 months from date of patient fitting

 

Aluminum Forward Angle Offset Plate Specifications

Weight 53 g
Patient Weight Limit* 250 lb (115 kg)
Warranty 12 months from date of patient fitting

 

*Body weight plus any loads normally or routinely carried cannot exceed this weight limit.

Product No. Description
FND-135106 Aluminum 4-Hole 12 mm Offset Plate
FND-135107 Aluminum Reverse Angle Offset Plate
FND-135105 Aluminum Forward Angle Offset Plate

Foundation Offset Plates Installation Instructions 

Fasteners & Torque
 
M6 x 10 mm Flat Head Capscrew 9 ft-lbs/12 Nm
M6 x 16 mm SS Flat Head Capscrew 9 ft-lbs/12 Nm

Find Your Liner Part Number

Enter an Alpha® Liner serial number and the corresponding part number will display.

 

Thank you for choosing Alpha Liners!