Alpha® Lamination Lock

Print

The Alpha Lamination Lock is small in size, light in weight, and can be used in either a one-step or a two-step lamination. With the incorporation of an attachment plate in a two-step lamination, various angle options can be utilized to optimize foot alignment instead of allowing the shuttle lock to dictate alignment. The Alpha Lamination Lock adapts to all six Alpha Locking Liner sizes — from small to extra-large. An airtight fit is achieved with the inclusion of a pin seal, which seals off the socket. One pin is included with each lock.

Product Highlights:
  • Use in one-step or two-step laminations
  • Use attachment plate to optimize foot alignment
  • Weight limit is 350 lbs (160 kg)
Weight 200 g
Patient Weight Limit 350 lbs (160 kg)
Warranty 12 months from date of patient fitting
U.S. L-Code Suggestions L5671
Product No. Description
700-AL600 Alpha® Lamination Lock
700-AL601 Alpha® Lamination Lock with Titanium Pyramid

WillowWood strongly recommends applying Loc-Tite Removable Threadlocker 242 (or equivalent) to the pin threads prior to installing the pin. Failure to ensure that the locking pin is secure in the Locking Liner could result in the pin coming out of the liner, resulting in the potential for injury to the amputee.

Alpha Lamination Lock Fabrication Instructions 

Fasteners & Torque
 
  M6 x 8 mm Socket Head Capscrew   hand-tighten
  M8 x 40 mm Socket Head Capscrew   hand-tighten
  M6 x 16 mm SS Flat Head C
Related products:
700-AL602 Alpha® Lamination Lock – Lock Mechanism
700-AL603 Alpha® Lamination Lock – Attachment Plate
700-AIS482 Alpha® Interlock Suspension System Lock Pin 1-1/2″
700-AIS488 Alpha® Interlock Suspension System Lock Pin 2″


Combined into one video is a complete look at the lock’s features and fabrication methods.

Find Your Liner Part Number

Enter an Alpha® Liner serial number and the corresponding part number will display.

 

Thank you for choosing Alpha Liners!